We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence AP-V42AW , as well as order other industrial equipment and constituent parts for its mend, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Iraq, Mongolia, Eritrea, Portugal, Slovenia, Haiti, Zambia, Syria, Montenegro, Laos, China, Egypt, Italy, Malawi, Sudan, Central African Republic, Tanzania, Georgia, Liechtenstein, Russia, Turkey, Ecuador, Palestine, Argentina, Senegal, Sweden, Belize, Fiji, Guinea, Togo, Tunisia, Slovakia, Bangladesh, Azerbaijan, Bolivia, Panama, Philippines, Cuba, Japan, Ukraine, Burundi, India, Sierra Leone, Eswatini, Antigua and Barbuda.
We have been delivering Keyence units all around the UK and anywhere in the world for over 11 years. All equipment and parts are provided with appropriate quality certificates, together with a guarantee from the official creator of products Keyence.
Thanks to the direct deliveries from prominent European manufacturers and a minimum trade margin, we recommend our customers the most affordable prices for all products presented in our catalogue. If necessary, our qualified specialists will help you select industrial equipment that will fully meet the requirements of the production process. More than 4,000 customers have already appreciated the high quality of the units we supply and the professionalism of the FAMAGA employees.
To clarify the value of Keyence AP-V42AW and shipment time, you can complete a special inquiry form on our website, dispatch a list of necessary equipment by E-mail or call to the mentioned phone numbers. We will be able to make the best commercial offer for you and provide optimal delivery times to any urban place in the UK and any country in the world.
Model | AP-V42AW | |
Type | Amplifier Unit, NPN | |
Applicable sensor head | AP-41M, AP-41, AP-43, AP-44, AP-48 | |
Set and display range | -15 to +110 % of F.S.*1 | |
Display | 4 1/2-digit, 2-colour, 7-segment LED (Character height: 4.5 mm), AI indicator (green), Display cycle: 10 times/s | |
Repeatability | ±0.2 % of F.S. | |
Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |
Display resolution | AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa | |
Power consumption | Normal | 12 V: 720 mW (60 mA) max., 24 V: 960 mW (40 mA) max. |
Display temperature characteristic | ±1 % of F.S. max. | |
Hysteresis | Variable (Standard: 0.5 % of FS, high-resolution/focus mode: 0.1 % of F.S.) | |
Response time (Chattering prevention function) | 1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable) | |
I/O | Analogue output | - |
Zero-shift input | Input time: 2 ms or more (or analog output selectable) | |
Control output | NPN open collector 20 mA max. (at 40 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable) | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | Eco mode | 12 V: 480 mW (40 mA) max., 24 V: 720 mW (30 mA) max. |
Environmental resistance | Ambient temperature | 0 to +50 °C (No freezing) |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Polycarbonate | |
Accessories | End Unit,Head Connector, and Expansion seal | |
Weight | Approx. 80 g (with 2-m cable) | |
*1 The focus range applies while in focus mode only. |