We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence AP-C40WP , as well as demand other industrial equipment and spare parts for its mend, please call FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, South Korea, Brazil, Mexico, Zimbabwe, Sweden, Liberia, Honduras, San Marino, Albania, Chad, Djibouti, Gambia, Eritrea, Philippines, Palestine, Guatemala, Algeria, Czech Republic, Morocco, Yemen, Bolivia, Burkina Faso, Switzerland, Tonga, Brunei, Mauritania, Armenia, Paraguay, Liechtenstein, Japan, Oman, South Sudan, New Zealand, Moldova, Namibia, Barbados, Dominica, Spain, El Salvador, Macedonia, Iran, Jamaica, Cyprus.
We have been supplying Keyence items all around the UK and anywhere in the world for over 10 years. All machinery and materials are provided with appropriate quality certificates, together with a guarantee from the official creator of products Keyence.
Thanks to the direct deliveries from major European manufacturers and a nominal trade margin, we offer our customers the most reasonable prices for all products presented in our catalogue. If necessary, our qualified specialists will help you select industrial instruments that will fully meet the necessities of the production process. More than 4,000 customers have already valued the high quality of the units we supply and the dedication of the FAMAGA team members.
To define the expense of Keyence AP-C40WP and delivery terms, you can fill out a special order form on our website, give a list of necessary equipment by E-mail or call to the specified phone numbers. We will be able to make the best commercial offer for you and give prompt supply times to any urban place in the UK and any country in the world.
Model | AP-C40WP | |
Type | Amplifier Unit, PNP | |
Applicable sensor head | AP-41M, AP-41, AP-43, AP-44, AP-48 | |
Set and display range | -15 to +110 % of F.S.*1 | |
Display | 3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s | |
Repeatability | ±0.2 % of F.S. | |
Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |
Display resolution | AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa | |
Power consumption | Normal | 12 V: 960 mW (80 mA) max., 24 V: 1,400 mW (60 mA) max. |
Display temperature characteristic | ±1 % of F.S. max. | |
Hysteresis | Variable (Standard: 0.5 % of FS, high-resolution/focus mode: 0.1 % of F.S.) | |
Response time (Chattering prevention function) | 1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable) | |
I/O | Analogue output | 1 to 5 V with load impedance of 1 kW max. (or zero-shift input selectable) |
Zero-shift input | Input time: 2 ms or more (or analog output selectable) | |
Control output | PNP open collector 100 mA max. (at 30 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable) | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | Eco mode | 12 V: 660 mW (55 mA) max., 24 V: 1,080 mW (45 mA) max. |
Environmental resistance | Ambient temperature | 0 to +50 °C (No freezing) |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate | |
Accessories | Power supply code (2-m cable with connector), head connector, and unit seal | |
Weight | Approx. 74 g (with 2-m cable) | |
*1 The focus range applies while in focus mode only. |