We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence AP-C33WP , as well as demand other industrial equipment and replacement parts for its refit, please call FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, South Africa, Burma, Guatemala, Seychelles, Grenada, Kuwait, Thailand, Gambia, Bolivia, Malta, Bahamas, Morocco, Georgia, Barbados, Congo, Fiji, Nigeria, Guyana, Kyrgyzstan, Antigua and Barbuda, Madagascar, Tanzania, Uganda, Bulgaria, Belgium, Cape Verde, Sweden, Lesotho, Mauritius, Serbia, Tunisia, Macedonia, Afghanistan, Rwanda, Laos, Central African Republic, Benin, Algeria, Kazakhstan, Spain, Eswatini, Equatorial Guinea, Turkey.
We have been shipping,conveying Keyence products all over the UK and anywhere in the world for over 9 years. All instruments and components are provided with appropriate quality certificates, together with a guarantee from the official producer of products Keyence.
Thanks to the shortest shipment from prominent European manufacturers and a nominal trade margin, we recommend our customers the most acceptable prices for all products exhibited in our catalogue. If necessary, our professional managers will help you select industrial equipment that will fully meet the requirements of the operation procedure. More than 4,000 clients have already appreciated the high quality of the units we transport and the professionalism of the FAMAGA workers.
To illuminate the price of Keyence AP-C33WP and shipment time, you can fill in a special order form on our website, dispatch a list of necessary instruments by E-mail or call to the quoted phone numbers. We will be able to make the best commercial offer for you and give optimal shipment times to any urban place in Britain and any country in the earth.
Model | AP-C33WP | |
Type | Positive pressure | |
Rated pressure | 0 to +1.000 MPa | |
Fluid type | Air or non-corrosive gases | |
Type of pressure | Gauge pressure | |
Display | 3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s | |
Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |
Power consumption | Normal | 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less*1 |
Display resolution | Normal mode: 0.001 MPa, Focus mode: 0.1 kPa | |
Display temperature characteristic | ±1 % of F.S. max. | |
Hysteresis | Variable (Standard: 0.5 % of F.S.)*2 | |
Response time (Chattering prevention function) | 2.5, 5, 100, or 500 ms (selectable) | |
I/O | Analogue output | 1 to 5 V with load impedance of 1 k? max. (or zero-shift input selectable) |
Zero-shift input | Input time: 2 ms or more. (or analog output selectable) | |
Control output | PNP open collector 100 mA max. (at 30 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable) | |
Pressure port | Rc (PT) 1/8 180 ° rotation | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | Eco mode | 12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less*1 |
Environmental resistance | Pressure resistance | 1.5 MPa |
Ambient temperature | 0 to +50 °C (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting | |
Accessories | Power supply cord (2-m with connector), Unit seal | |
Weight | Approx. 30 g (without cable) /Approx. 85 g (with 2-m cable) | |
*1 Excluding the current for analog output Including the current for the sensor head *2 A standard of 0.2 % of FS applies while in focus mode. |