We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to gain Keyence AP-C33W , as well as demand other industrial equipment and replacement parts for its refit, please approach FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Bulgaria, Poland, Kyrgyzstan, Croatia, South Korea, India, Jamaica, Ethiopia, El Salvador, San Marino, Eritrea, East Timor, Papua New Guinea, Comoros, Belarus, Switzerland, Finland, Greece, Mali, Nigeria, Kazakhstan, Guatemala, Mauritania, Estonia, Liberia, Sudan, Hungary, Sierra Leone, Yemen, Sri Lanka, Suriname, Côte d\'Ivoire, Slovenia, Luxembourg, Swaziland, Bhutan, Vietnam, Kenya, New Zealand, Russia, Honduras, Slovakia, Burkina Faso.
We have been distributing Keyence items all over the UK and anywhere in the planet for over 9 years. All apparatus and replacements are provided with appropriate quality certificates, with a guarantee from the official producer of products Keyence.
Thanks to the shortest shipment from global European manufacturers and a low trade margin, we give our customers the most affordable prices for all products presented in our catalogue. If necessary, our professional managers will help you pick industrial apparatus that will fully meet the requirements of the manufacturing process. More than 4,000 buyers have already valued the high quality of the goods we deliver and the professionalism of the FAMAGA employees.
To clarify the cost of Keyence AP-C33W and delivery terms, you can complete a special order form on our website, give a list of desirable apparatus by E-mail or call to the quoted phone numbers. We will be able to create the best commercial offer for you and provide optimal supply times to any place in Britain and any country in the world.
Model | AP-C33W | |
Type | Positive pressure | |
Rated pressure | 0 to +1.000 MPa | |
Fluid type | Air or non-corrosive gases | |
Type of pressure | Gauge pressure | |
Display | 3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s | |
Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |
Power consumption | Normal | 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less*1 |
Display resolution | Normal mode: 0.001 MPa, Focus mode: 0.1 kPa | |
Display temperature characteristic | ±1 % of F.S. max. | |
Hysteresis | Variable (Standard: 0.5 % of F.S.)*2 | |
Response time (Chattering prevention function) | 2.5, 5, 100, or 500 ms (selectable) | |
I/O | Analogue output | 1 to 5 V with load impedance of 1 k? max. (or zero-shift input selectable) |
Zero-shift input | Input time: 2 ms or more. (or analog output selectable) | |
Control output | NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable) | |
Pressure port | Rc (PT) 1/8 180 ° rotation | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | Eco mode | 12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less*1 |
Environmental resistance | Pressure resistance | 1.5 MPa |
Ambient temperature | 0 to +50 °C (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting | |
Accessories | Power supply cord (2-m with connector), Unit seal | |
Weight | Approx. 30 g (without cable) /Approx. 85 g (with 2-m cable) | |
*1 Excluding the current for analog output Including the current for the sensor head *2 A standard of 0.2 % of FS applies while in focus mode. |