We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence FD-XS1 , as well as order other industrial equipment and constituent parts for its mend, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Canada, Cameroon, Jamaica, Singapore, Gambia, Suriname, Madagascar, Gabon, El Salvador, Azerbaijan, Mozambique, Spain, Iraq, Armenia, Bosnia and Herzegovina, Angola, Slovenia, Grenada, Togo, Lesotho, Namibia, Burkina Faso, Rwanda, Belarus, Finland, Swaziland, Burundi, Greece, Cuba, South Sudan, India, Cambodia, Sri Lanka, Czech Republic, New Zealand, Oman, Liechtenstein, South Africa.
We have been delivering Keyence units all around the UK and anywhere in the world for over 11 years. All equipment and parts are provided with appropriate quality certificates, together with a guarantee from the official creator of products Keyence.
Thanks to the direct deliveries from prominent European manufacturers and a minimum trade margin, we recommend our customers the most affordable prices for all products presented in our catalogue. If necessary, our qualified specialists will help you select industrial equipment that will fully meet the requirements of the production process. More than 4,000 customers have already appreciated the high quality of the units we supply and the professionalism of the FAMAGA employees.
To clarify the value of Keyence FD-XS1 and shipment time, you can complete a special inquiry form on our website, dispatch a list of necessary equipment by E-mail or call to the mentioned phone numbers. We will be able to make the best commercial offer for you and provide optimal delivery times to any urban place in the UK and any country in the world.
Model | FD-XS1 | |||
Supported pipe materials | Metal pipes, Plastic pipes (soft/hard) *1 | |||
Supported fluids | Liquids (water, oil, adhesive, grease, chemical solution, etc.) *1 | |||
Supported fluid temperature | 0 °C (no freezing on the pipe surface) to 100 °C (Pipe surface temperature) | |||
Clamp set model | Plastic pipe/tube attachment | FD-XC1R1, FD-XC1R2 | ||
Metal pipe attachment | FD-XC1M | |||
Maximum rated flow rate | 0 to 1000 mL/min | |||
Zero cut flow rate | 20 mL/min*2 (variable, default) | |||
Display resolution | Instantaneous flow rate | 0.1/1/10 mL/min (Displayed on controller) | ||
Shot amount | 0.001/0.01/0.1/1 mL (Displayed on controller) | |||
Repeatability | Plastic pipe /tube attachment | Response time: 50 ms | F.S. | ±0.6 %*3*4 |
Instantaneous flow rate | ±6 mL/min*3*4 | |||
Response time: 500 ms | ±1.9 mL/min*3 | |||
Metal pipe attachment | Response time: 50 ms | F.S. | ±1 %*3*4 | |
Instantaneous flow rate | ±10 mL/min*3*4 | |||
Response time: 500 ms | ±3.2 mL/min*3 | |||
Hysteresis | Variable | |||
Integrated unit display | 0.1/1/10/100/1000/10000 mL (displayed on controller) | |||
Display method | Status indicator | |||
Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) , IP68G (JIS C0920) *5 | ||
Operating ambient temperature | 0 to 60 °C (No freezing) | |||
Operating ambient humidity | 35 % to 85 %RH (No condensation) | |||
Vibration resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each for X,Y,Z direction | |||
Shock resistance | 50 G 11 ms, 3 times each for X,Y,Z direction | |||
Material | Sensor head | Head body: PPS/PPSU, in-cable amplifier: PPS, cable: PVC, controller connector: PPS/PBT/POM | ||
Clamp set | For plastic pipe | Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7 | ||
For metal pipe | Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7 | |||
Weight | Approx. 230 g | |||
*1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe. *2 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate. *3 This specification is valid when the flow velocity distribution is stable. This value does not take into account the effects of pulsation or fluctuations in flow velocity distribution due to facility factors. Convert the F.S. (full scale value) listed in the table according to the rated flow range. *4 The longer the response time is set, the more repeatability is improved. As a guideline, use v (50 ms/response time) times. *5 The connector part of the sensor head cable is IP65/IP67. |