We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
FD-Q32C
Type
Process Sensor
Description
anklemmbarer Durchflusssensor 1“ (max. 200 L/min) bzw. 1 ¼“ (max. 300 L/min) 90261021000 CHINA
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you want to gain Keyence FD-Q32C , along with require other industrial equipment and spare parts for its fix, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Papua New Guinea, Bangladesh, Vietnam, Ethiopia, Cape Verde, Cambodia, South Africa, Burma, Tonga, Antigua and Barbuda, Bhutan, Senegal, Libya, Mozambique, Indonesia, Malaysia, Saudi Arabia, Monaco, South Sudan, Turkmenistan, Slovakia, Serbia, Zambia, Kiribati, Grenada, Lesotho, Armenia, Sweden, Bolivia, Cyprus, Greece, Honduras, Haiti, Denmark, Estonia, Myanmar, Egypt, Côte d\'Ivoire.
We have been distributing Keyence units all around Great Britain and anywhere in the world for over 9 years. All apparatus and materials are provided with appropriate quality certificates, as well as a guarantee from the official manufacturer of products Keyence.
Thanks to the prompt supplies from global European manufacturers and a low trade margin, we recommend our customers the most affordable prices for all products exhibited in our catalogue. If necessary, our qualified specialists will help you elect industrial apparatus that will fully meet the necessities of the mode of operation. More than 4,000 buyers have already praised the high quality of the goods we deliver and the professionalism of the FAMAGA employees.
To clear up the expense of Keyence FD-Q32C and delivery terms, you can fill in a special order form on our website, dispatch a list of desirable instruments by E-mail or call to the mentioned phone numbers. We will be able to create the best commercial offer for you and provide prompt delivery times to any place in Britain and any country in the earth.
| Model | FD-Q32C | |
| Supported pipe diameter | 1' (25 A), o28 to o37 (mm) 1 1/4' (32 A), o37 to o44 (mm) | |
| Supported pipe materials | Metal pipe/Resin pipe*1 | |
| Supported fluids | Various liquid [i.e. water (including DI), oils, chemicals, etc.]*1 | |
| Supported fluid temperature | 0 to 85°C (No freezing on the pipe surface)*2 | |
| Maximum rated flow | 1' (25 A): 200 L/min 1 1/4' (32 A): 300 L/min | |
| Zero cut flow rate | 5 L/min (Default)*3 | |
| Display method | Status indicator, output indicator, dual row display with 4-digit, 7 segment LED, stability level indicator | |
| Display update cycle | Approx. 3 Hz | |
| Display resolution | 0.1/ 1 (Default :1) (L/min) | |
| Response time | 0.5 s / 1.0 s / 2.5 s / 5 s / 10 s / 30 s / 60 s | |
| Repeatability | 0.5 s : ±2.0%, 1 s:±1.5%, 2.5 s : ±1.0%, 5 s : ±0.5%, 10 s : ±0.35%, 30 s : ±0.2%, 60 s : ±0.15% (/F.S.*4 (Specific to selected response time)) | |
| Hysteresis | Variable | |
| Integrated flow unit display | 1/ 10/ 100/ 1000/ 10000 (Default : 1) (L) | |
| Integrated flow data storage cycle | Save to memory every 10 seconds | |
| Memory backup | EEPROM (Data storage length: 10 years or longer, Data read/write frequency: 1 million times or more) | |
| Power I/O connector | M12 4-pin connector | |
| Input/Output (Selectable) | Output (ch.1/ch.2) | Control output/ Pulse output/ Error output (Selectable, Default : ch.1 control output/ ch.2 not used), NPN/PNP setting switchable,open collector output 30 V or less, max. 100 mA/ch., residual voltage 2.5 V or less*5 |
| Analogue output (ch.1/ch.2) | 4 to 20 mA / 0 to 20 mA (Selectable, Default: not used), load resistance 500 ? or less*5 | |
| External input (ch.2) | Integrated flow reset input/ Flow rate zero input/ Origin adjustment input (Selectable, Default: not used), short-circuit current 1.5 mA or less, input time 20 ms or more*5 | |
| Power source | Power supply voltage | 20 to 30 VDC , ripple (P-P) 10% max, Class2/LPS |
| Current consumption | 130 mA or less (Load current excluded)*6 | |
| Protection circuit | Power supply reverse connection protection, power supply surge protection, each output short-circuit protection, each output surge protection | |
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) |
| Ambient temperature | -10 to +60 °C (No freezing) | |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Shock resistance | 100 m/s2, 16 ms pulse, 1,000 times in each of the X, Y, and Z directions | |
| Material | Sensor main unit | PPS/PES/PBT/SUS303/SUS304/SUSXM7 |
| Sensor surface | Rubber | |
| Mounting bracket | SUS304/PA/POM/SUSXM7 | |
| Weight | Approx. 530 g (including mounting bracket) | |
| *1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Detection may be unstable on certain non-standard pipes (i.e. lined pipes) *2 Contact KEYENCE when the temperature of the pipe is greater than 85°C *3 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate. *4 This specification is valid when the flow velocity distribution is stable. This value does not take into account the effects of pulsation or fluctuations in flow velocity distribution due to facility factors. Convert the F.S. (full scale) listed in the table according to the rated flow range. *5 IO-Link: Compatible with Specification v1.1 / COM2 (38.4 kbps) The setting file can be downloaded from the KEYENCE website. If using the unit in the environment where downloading the file is not possible via internet, contact your nearest KEYENCE office. IO-Link is either registered trademarks or trademarks of PROFIBUS Nutzerorganisation e.V. (PNO) *6 When including the loads, please add 200 mA to this value. |
