We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
RD-50EW
Type
Process Sensor
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Model | RD-50EW | |
| Measurement function | DC voltage measurement, DC current measurement | |
| A/D converting system | Successive comparison | |
| Measurement range | ±5 VDC, ±10 VDC, 4 to 20 mA DC (selectable) | |
| Display range | -19999 to +39999 | |
| Measurement accuracy | ±0.03 % of F.S. (at ±5 VDC range), ±0.03 % of F.S. (at ±10 VDC range) ±0.05 % of F.S. (at 4 to 20 mA DC range) | |
| Input | Impedance | 1 M? (for voltage input), 350 ? (for current input) |
| System | Single-ended | |
| Number of inputs | 2 | |
| Sampling rate | 2,000 times/second | |
| Display speed | 20 times/second | |
| Display power | 7-segment 3-colour LED (character height: 15.24 mm) | |
| Over-range alarm | FFFF is displayed | |
| Control input | Synchronous, Hold-reset, Auto-zero, External setting, NPN or non-voltage contact signal | |
| Control input | Timing input | |
| Hold reset input | ||
| Auto-zero input | ||
| External setting input | ||
| Controloutput | Setting method | 4 steps x 8 programmable setups (selectable)*1 |
| Signal | 5 x NPN (HH, HI, GO, LO, LL): 100 mA max. (40 V max.)*1 | |
| Response time | 1 ms (when average number 1)*1 | |
| OFF-delay time | 60 ms (ON/OFF selectable)*1 | |
| Analogue output voltage | Output voltage | ±10 VDC |
| Impedance | 100 ? | |
| Response time | 1 ms (when average number 1)*2 | |
| Interface | Control input by NPN open-collector ornon-voltage contact signal | |
| Major functions | MDL, digital fi lter, auto-zero, offset, input, data processing (10 modes), tolerance limit storage (up to 8 sets), decimal point shift, error message display, etc. | |
| Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Current consumption | 270 mA or less | |
| Environmental resistance | Ambient temperature | 0 to +50 °C |
| Relative humidity | 35 to 85 % RH (No condensation) | |
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
| Weight | Approx. 700 g (excluding fi ttings) | |
| *1 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP output converter. *2 Requires 1.5 ms every second during self-compensation sequence to prevent temperature fl uctuations. |
