We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence LS-9501P , as well as order other industrial equipment and spare parts for its repair, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Portugal, Algeria, Vietnam, Mozambique, Uzbekistan, Burma, Peru, Bahamas, Argentina, Philippines, Guinea-Bissau, Haiti, Namibia, Pakistan, Ethiopia, Georgia, Guatemala, Qatar, Togo, Sri Lanka, East Timor, Kenya, Burundi, Tanzania, Mauritania, United Arab Emirates, The Gambia, Ecuador, Tonga, Norway, Guyana, Sweden, Mauritius, Czech Republic, India, Japan, Lithuania, Rwanda, Egypt, South Korea, Turkey, Kazakhstan, Iraq, Bosnia and Herzegovina.
We have been delivering Keyence units throughout the UK and anywhere in the world for over 10 years. All equipment and parts are provided with appropriate quality certificates, together with a guarantee from the official manufacturer of products Keyence.
Thanks to the direct deliveries from prominent European manufacturers and a minimum trade margin, we recommend our customers the most affordable prices for all products presented in our catalogue. If necessary, our qualified specialists will help you select industrial equipment that will fully meet the requirements of the production process. More than 4,000 customers have already appreciated the high quality of the units we supply and the professionalism of the FAMAGA employees.
To clarify the value of Keyence LS-9501P and delivery times, you can fill out a special order form on our website, send a list of necessary equipment by E-mail or call to the mentioned phone numbers. We will be able to make the best commercial offer for you and provide optimal delivery times to any city in the UK and any country in the world.
Model | LS-9501P*1 | |
Type | Controller: PNP output type | |
No. of connectable sensor heads | 2 | |
Head compatibility | Yes | |
Display | Minimum display unit | 0.01 µm |
Display range | ±99,999.99 µm to ±9,999.9 mm | |
LED display | POWER ON indicator, ERROR indicator | |
Input terminal block | Encoder input | NPN/PNP open-collector output, voltage output (5 V/12 V/24 V), line-driver output |
Synchronous 1, 2 input | Voltage input | |
Auto-zero 1, 2 input | ||
Reset 1, 2 input | ||
Storage trigger input | ||
Storage enable input | ||
Storage data clear input | ||
Statistics 1, 2 input | ||
Statistics clear 1, 2 input | ||
Program selection input | Voltage input x 4 inputs | |
Output terminal | Analogue voltage output | ±10 V x 2 outputs, output impedance 100 ? |
Analogue current output | 4 to 20 mA x 2 outputs, compatible load max. 350 ? | |
Universal output | PNP open-collector output x 10 outputs Measured value and tolerance judgment output, status output allocatable | |
Status 1, 2 output | PNP open-collector output | |
Total judgment output | ||
Memory FULL output | ||
Strobe 1, 2 output | ||
Error output | PNP open-collector output (N.C.) | |
Interface | Ethernet | 1000BASE-T/100BASE-TX |
USB | USB 2.0 HI-SPEED supported (USB 1.1 Full-SPEED compatible) | |
RS-232C | Measured value output, control I/O, setting change, baud rate can be selected up to 115,200 bps | |
Display and settings panel | LS-D1000 Max. four heads connectable | |
Rating | Power voltage | 24 VDC ±10 %, including Ripple (P-P) |
Current consumption | When LS-HA100 not used: 1.0 A max. when 1 head connected, 1.4 A max. when 2 heads connected When LS-HA100 in use: 2.0 A max. when 3 heads connected, 2.3 A max. when 4 heads connected*2 | |
Environmental resistance | Ambient temperature | When LS-HA100 not used: 0 to +50 °C When LS-HA100 in use: 0 to +45 °C |
Relative humidity | 20 to 85 % RH (No condensation) | |
Weight | Approx. 1,500 g | |
*1 PNP open-collector output rating: 50 mA max. (30 V max.), residual voltage of 1 V max. Voltage input rating: Input max. voltage 26.4 V, min. ON voltage 10.8 V, OFF current 0.6 mA max. *2 Add the current consumption values for all units when connecting the display settings panel and expansion units. When the LS-9006D or LS-9030D is connected, it counts as two heads. |