We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence LK-502 , as well as order other industrial equipment and spare parts for its repair, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Gambia, Sudan, Oman, Jordan, Cuba, Tajikistan, Norway, Eswatini, Slovakia, Equatorial Guinea, Luxembourg, Pakistan, Macedonia, Malaysia, Haiti, Costa Rica, East Timor, Serbia, Bulgaria, Dominica, Uzbekistan, Kyrgyzstan, Tunisia, Laos, Peru, Algeria, Jamaica, Turkmenistan, Cyprus, Azerbaijan, Bosnia and Herzegovina, Dominican Republic, Libya, Japan, Moldova, Central African Republic, Bhutan, Sweden, Myanmar, Benin, Guyana, Bolivia, Armenia, Thailand.
We have been delivering Keyence elements throughout the UK and anywhere in the world for over 10 years. All equipment and replacements are provided with appropriate quality certificates, together with a guarantee from the official manufacturer of products Keyence.
Thanks to the direct deliveries from major European manufacturers and a minimum trade margin, we propose our customers the most affordable prices for all products presented in our catalogue. If necessary, our qualified specialists will help you select industrial equipment that will fully meet the requirements of the production process. More than 4,000 customers have already appreciated the high quality of the elements we supply and the professionalism of the FAMAGA employees.
To clarify the expense of Keyence LK-502 and delivery times, you can fill out a special order form on our website, send a list of necessary equipment by E-mail or call to the mentioned phone numbers. We will be able to make the best commercial offer for you and provide optimal delivery times to any city in the UK and any country in the world.
Model | LK-502 | |
Type | Sensor head Long-distance *1 Sensor head | |
Measurement mode | High-precision mode,Long-range mode | |
Reference distance | 350 mm (High-precision mode),500 mm (Long-range mode) | |
Measuring range | ±100 mm (High-precision mode),±250 mm (Long-range mode) | |
Light source | Type | Red semiconductor laser |
Wavelength | 690 nm (visible light), Class 2 | |
Output | 0.95 mW maximum | |
Spot diameter (at standard distance) | Approx. 0.7 mm (high-precision mode), approx. 0.3 mm (long mode) | |
Linearity | ±0.1% of F.S. | |
Repeatability | 10 µm*2 (High-precision mode), 50 µm*2 (Long-range mode) | |
Analogue output | Output voltage | ±10 V (10 µm/mV)*3 (High-precision mode), ±5 V (50 µm/mV)*3 (Long-range mode) |
Impedance | 100 ? | |
Output current | 4 to 20 mA (350 ? maximum)*4 | |
Alarm output | NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max. | |
Sampling cycle | 1,024 µs | |
Other functions | Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment | |
Temperature characteristics | 0.02% of F.S./°C | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Maximum current consumption | 400 mA max. | |
Environmental resistance | Enclosure rating | IP67 |
Ambient light | Incandescent or fl uorescent lamp: 10,000 lux max. | |
Ambient temperature | 0 to +50 °C (No condensation) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Aluminium die-cast | |
Weight | Approx. 700 g (including cable) | |
*1 The LK-503 can both be used in High-precision mode or Long-range mode. *2 Repeatability was obtained using KEYENCE's analogue sensor controller (RD-50) with the number of averaging measurements set to 64. Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board. *3 When measurement is impossible, 12 V (31.2 mA) is output. *4 The ±5 V analog voltage output range (the ±10 V range on the LK-010) becomes the 4 to 20 mA analog current output. |