We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence BL-185SO(7031) , as well as order other industrial equipment and constituent parts for its mend, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Georgia, Malawi, Suriname, Sri Lanka, Liechtenstein, Belize, Burkina Faso, Seychelles, Rwanda, Indonesia, Mexico, Kiribati, Russia, Andorra, East Timor, Pakistan, Ghana, Lesotho, Congo, Barbados, Ukraine, Czech Republic, Sweden, Dominican Republic, Zambia, Sudan, Tajikistan, South Korea, El Salvador, Eswatini, Paraguay, Algeria, Malaysia, Cambodia, Belgium, Nigeria, Bulgaria, Brunei, Guyana, Afghanistan, Austria, Niger, Antigua and Barbuda, Cuba, Angola.
We have been delivering Keyence units all around the UK and anywhere in the world for over 11 years. All equipment and parts are provided with appropriate quality certificates, together with a guarantee from the official creator of products Keyence.
Thanks to the direct deliveries from prominent European manufacturers and a minimum trade margin, we recommend our customers the most affordable prices for all products presented in our catalogue. If necessary, our qualified specialists will help you select industrial equipment that will fully meet the requirements of the production process. More than 4,000 customers have already appreciated the high quality of the units we supply and the professionalism of the FAMAGA employees.
To clarify the value of Keyence BL-185SO(7031) and shipment time, you can complete a special inquiry form on our website, dispatch a list of necessary equipment by E-mail or call to the mentioned phone numbers. We will be able to make the best commercial offer for you and provide optimal delivery times to any urban place in the UK and any country in the world.
Model | BL-185SO(7031) | |
Reading direction | Side | |
Light source/Light receiving element | LED/CCD image sensor | |
Reading distance | 33 ±10 mm *1 (Using narrow bars of at least 0.19 mm in width) | |
Readable bar width | 0.125 to 1.0 mm *2 | |
Largest readable label width | 80 mm *3 (Using narrow bars of at least 0.19 mm in width) | |
PCS | 0.45 or more (Refl ectance of white part: 75% or more) | |
Scanning rate | 500 scans/sec | |
Supported codes | CODE39, ITF, Industrial 2-of-5, COOP 2-of-5, Codabar, CODE128, EAN/UPC (A·E) | |
Number of readable digits | 32 digits | |
Trigger input | Non-voltage input (contact or solid-state), TTL input is also possible. | |
Serial interface | Applied standard | RS-232C |
Synchronisation | Start-Stop | |
Transmission code | ASCII | |
Baud rate | 600/1200/2400/4800/9600/19200/31250/38400 bps | |
Data length | 7/8 bits | |
Parity check | None/Even/Odd | |
Stop bit length | 1 bit/2 bits | |
OK/NG output | Output form | NPN |
Rated load | 24 VDC, 100 mA | |
Leakage current (at OFF) | 0.1 mA max. | |
Residual voltage (at ON) | 0.5 V max. | |
Rating | Power voltage | 5 VDC ±5 %*4 |
Current consumption | 300 mA | |
Environmental resistance | Ambient light | Sunlight/Incandescent lamp: 10,000 lux, Fluorescent lamp: 3,000 lux. |
Operating environment | No dust or corrosive gas present | |
Ambient temperature | 0 to +40 °C | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Weight | Approx. 180 g | |
*1 33 ±5 mm when the narrowest bar is less than 0.19 mm. *2 Readable bar width indicates the range of the narrowest readable bar. *3 60 mm when the narrowest bar is less than 0.19 mm. *4 Use a stable power supply of 5 VDC ±5 % . |