We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence FS-V33CP , as well as demand other industrial equipment and replacement parts for its fix, please call FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Malta, Libya, Moldova, Uganda, Dominica, Croatia, Togo, Egypt, Papua New Guinea, Equatorial Guinea, United Arab Emirates, Côte d\'Ivoire, Suriname, Spain, Greece, Romania, Tanzania, Morocco, Nigeria, Grenada, Andorra, Iran, Colombia, Indonesia, Liechtenstein, Rwanda, Denmark, New Zealand, Argentina, Brunei, Armenia, Mozambique, Azerbaijan, Lesotho, Cyprus, Central African Republic, Myanmar, Bahrain, El Salvador, Russia, Cambodia, Slovenia, Haiti, Iraq.
We have been supplying Keyence units throughout the UK and anywhere in the earth for over 10 years. All equipment and constituents are provided with appropriate quality certificates, together with a guarantee from the official manufacturer of products Keyence.
Thanks to the shortest shipment from leading European manufacturers and a nominal trade margin, we recommend our customers the most fair costs for all products presented in our catalogue. If necessary, our professional managers will help you select industrial apparatus that will fully meet the requirements of the production process. More than 4,000 buyers have already appreciated the high quality of the units we transport and the competence of the FAMAGA workers.
To illuminate the cost of Keyence FS-V33CP and delivery times, you can fill out a special inquiry form on our website, give a list of necessary equipment by E-mail or call to the specified phone numbers. We will be able to make the best commercial offer for you and give prompt shipment times to any place in Great Britain and any country in the world.
Model | FS-V33CP | |
Type | 2-output with M8 connector | |
Output | PNP | |
Main unit/Expansion unit | Main unit | |
Control output | 2 outputs | |
Monitor output (1 to 5 V) | N/A | |
External input | ||
Connector | M8 | |
Light source | Red, 4-element LED (Wavelength: 640 nm) | |
Response time | 33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO) | |
Output selection | LIGHT-ON/DARK-ON (switch-selectable) | |
Display indicator | Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512, Excess gain: 0P to 999P, Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display | |
Detection mode | Light intensity (area detection possible, automatic sensitivity-tracking function provided)/ [Limited light intensity/Count check/Abnormality detection] | |
Timer function | OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max. | |
Control output | PNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max. | |
External inputy | Input time: 2 ms (ON)/20 ms (OFF) min.*2 | |
Unit expansion | Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units. | |
Number of interference prevention units | Normal operation | HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8? |
Size | 30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | 830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/ Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V, 32 mA max.)*3 | |
Environmental resistance | Ambient light | Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max. |
Ambient temperature | -10 to +55 °C (No freezing)*4 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
Case material | Polycarbonate | |
Accessories | N/A | |
Weight | Approx. 22 g | |
*1 Total current of two outputs should be less than 100 mA. *2 Only available on certain models. *3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA). *4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 2 Units: -10 to +55 °C, 3 to 10 Units: -10 to +50 °C, 11 to 16 Units: -10 to +45 °C |