We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence FS-V32P , as well as require other industrial equipment and constituent parts for its mend, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Romania, Ghana, Rwanda, Nicaragua, Benin, Australia, Guinea-Bissau, Chile, Tanzania, El Salvador, South Sudan, Russia, Ecuador, Algeria, Uzbekistan, Mexico, Saudi Arabia, Kyrgyzstan, Argentina, Belize, Pakistan, Eswatini, Turkmenistan, United Arab Emirates, Mauritius, Monaco, Comoros, Afghanistan, Bahrain, Belgium, Sweden, Paraguay, India, Philippines, Turkey, Jamaica, Austria, Venezuela, Kazakhstan, Kenya, China, Malaysia, Indonesia, The Bahamas.
We have been distributing Keyence elements all around the UK and anywhere in the world for over 10 years. All equipment and parts are provided with appropriate quality certificates, as well as a guarantee from the official creator of products Keyence.
Thanks to the upfront deliveries from prominent European manufacturers and a low trade margin, we propose our customers the most acceptable prices for all products presented in our catalogue. If necessary, our qualified specialists will help you elect industrial equipment that will fully meet the requirements of the mode of operation. More than 4,000 buyers have already comprehended the high quality of the units we deliver and the professionalism of the FAMAGA workers.
To clarify the charge of Keyence FS-V32P and delivery times, you can complete a special filling form on our website, give a list of desirable machinery by E-mail or call to the mentioned phone numbers. We will be able to create the best commercial offer for you and give optimal delivery times to any city in the UK and any country in the world.
Model | FS-V32P | |
Type | 1-output with cable | |
Output | PNP | |
Main unit/Expansion unit | Expansion unit | |
Control output | 1 output | |
Monitor output (1 to 5 V) | N/A | |
External input | ||
Connector | ? | |
Light source | Red, 4-element LED (Wavelength: 640 nm) | |
Response time | 33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO) | |
Output selection | LIGHT-ON/DARK-ON (switch-selectable) | |
Display indicator | Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512, Excess gain: 0P to 999P, Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display | |
Detection mode | Light intensity (area detection possible, automatic sensitivity-tracking function provided) | |
Timer function | OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max. | |
Control output | PNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max. | |
External inputy | Input time: 2 ms (ON)/20 ms (OFF) min.*2 | |
Unit expansion | Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units. | |
Number of interference prevention units | Normal operation | HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8? |
Size | 30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Power consumption | Normal: 750 mW max. (Using 24 V, 31 mA max., using 12 V, 40 mA max.)/ Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V, 28 mA max.)*3 | |
Environmental resistance | Ambient light | Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max. |
Ambient temperature | -10 to +55 °C (No freezing)*4 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
Case material | Polycarbonate | |
Accessories | N/A | |
Weight | Approx. 45 g | |
*1 Total current of two outputs should be less than 100 mA. *2 Only available on certain models. *3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA). *4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 2 Units: -10 to +55 °C, 3 to 10 Units: -10 to +50 °C, 11 to 16 Units: -10 to +45 °C |