We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to purchase Keyence EX-V05 , along with order other industrial equipment and replacement parts for its repair, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Turkey, Belgium, Tajikistan, Kuwait, Iraq, Russia, Panama, Chad, Mexico, Tonga, Mozambique, Lithuania, Slovenia, Dominica, Morocco, Oman, Egypt, Turkmenistan, South Sudan, United Arab Emirates, Burkina Faso, Sweden, Namibia, Mauritania, Bahrain, Kenya, Liberia, Bolivia, Nigeria, Myanmar, Monaco, India, Lesotho, Rwanda, Bhutan, Lebanon, Jamaica, Benin, El Salvador.
We have been delivering Keyence elements all around the United Kingdom and anywhere in the globe for over 9 years. All instruments and replacements are provided with appropriate quality certificates, together with a guarantee from the official producer of products Keyence.
Thanks to the prompt supplies from leading European manufacturers and a low trade margin, we offer our customers the most affordable prices for all products displayed in our catalogue. If necessary, our qualified specialists will help you select industrial equipment that will fully meet the needs of the mode of operation. More than 4,000 consumers have already comprehended the high quality of the units we deliver and the professionalism of the FAMAGA employees.
To clarify the expense of Keyence EX-V05 and shipment time, you can fill in a special inquiry form on our website, give a list of essential equipment by E-mail or call to the mentioned phone numbers. We will be able to make the best trade offer for you and present short distribution times to any place in the United Kingdom and any country in the world.
Model | EX-V05*1 | |
Type | Amplifier Unit NPN | |
Shape | o14.5 x 20 mm Cylindrical,threaded | |
Measuring range | 0 to 5 mm | |
A/D converting system | ? | |
Display range | -19999 to +19999 | |
Linearity | ±0.3% of F.S. | |
Resolution (No. of averaging measurements: 64) | 1 µm | |
Sampling rate | 40000 samplings max./sec. *2 | |
Display speed | 20 times/sec. | |
Display power | 7-segment 2-colour LED | |
Over-range alarm | ±FFFF is displayed. | |
Control input | Timing input | NPN open-collector or non-voltage contact signal |
Reset input | ||
Auto-zero input | ||
Judgment output: Inhibit input | ||
Synchronization/external settings input | ||
Control output | NPN open-collector or non-voltage contact (Timing input, Reset input, Auto-zero input, Comparator output disable input, Synchronous input, External setting input) | |
Controloutput | Setting method | Upper/lower 2-level setting x 4 patterns (selectable) |
Control output | Signal | NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.) |
Controloutput | Response time | 0.075 ms (at maximum speed) |
OFF-delay time | 60 ms (ON/OFF selectable) | |
Strobe output | NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.O.) | |
Control output | Alarm output | NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.C.) |
Analogue output voltage | Output voltage | ±5V |
Impedance | 100 ? | |
Response time | 0.075 ms (at maximum speed) | |
Temperature characteristics | 0.07% of F.S./°C *3 | |
Major functions | FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc. | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | 240 mA or less | |
Environmental resistance | Ambient temperature | 0 to +50 °C |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Weight | Approx. 235 g | |
*1 The above data was obtained using an iron target (S45C, SS400, t=1 mm). When measuring aluminium, copper, or stainless steel targets, refer to the linear characteristics for these materials. *2 When the digital filter function is used, the sampling rate is 20000 sampling/sec. *3 When the distance between the sensor head and the target is within 50% of the measuring range. |