We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to get Keyence EX-110V , as well as request other industrial equipment and replacement parts for its refit, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Jordan, Suriname, Slovenia, Liechtenstein, Belize, Myanmar, Estonia, Gambia, Switzerland, Dominican Republic, Sierra Leone, Cameroon, The Bahamas, Panama, Ecuador, Qatar, Barbados, Russia, Côte d\'Ivoire, Israel, South Africa, Burundi, Cuba, Uganda, Austria, Ukraine, Dominica, Turkey, China, Ghana, Kiribati, Comoros, Libya, Congo, Algeria, Tajikistan, Tonga, Afghanistan.
We have been delivering Keyence elements throughout Great Britain and anywhere in the globe for over 11 years. All instruments and constituents are provided with appropriate quality certificates, along with a guarantee from the official producer of products Keyence.
Thanks to the direct deliveries from major European manufacturers and a low trade margin, we suggest our customers the most fair costs for all products presented in our catalogue. If necessary, our professional managers will help you choose industrial instruments that will fully meet the requirements of the production process. More than 4,000 customers have already praised the high quality of the goods we bring and the professionalism of the FAMAGA staff.
To define the cost of Keyence EX-110V and delivery terms, you can complete a special inquiry form on our website, send a list of required machinery by E-mail or call to the mentioned phone numbers. We will be able to create the best trade offer for you and prepare optimal delivery times to any urban place in the United Kingdom and any country in the earth.
Model | EX-110V*1 | |
Type | Sensor head | |
Amplifier unit | EX-V02(P) | |
Shape | M10 x 18 mm Threaded | |
Measuring range | 0 to 2 mm | |
A/D converting system | ? | |
Display range | -19999 to +19999 | |
Linearity | ±0.3% of F.S. | |
Resolution (No. of averaging measurements: 64) | 0.4 µm | |
Sampling rate | 40000 samplings max./sec. *2 | |
Display speed | 20 times/sec. | |
Display power | 7-segment 2-colour LED | |
Over-range alarm | ±FFFF is displayed. | |
Control output | NPN open-collector or non-voltage contact signal | |
Controloutput | Setting method | Upper/lower 2-level setting x 4 patterns (selectable) |
Control output | Signal | ? |
Controloutput | Response time | 0.075 ms (at maximum speed) |
OFF-delay time | 60 ms (ON/OFF selectable) | |
Strobe output | NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.) | |
Control output | Alarm output | ? |
Analogue output voltage | Output voltage | ±5V |
Impedance | 100 ? | |
Response time | 0.075 ms (at maximum speed) | |
Temperature characteristics | 0.07% of F.S./°C *3 | |
Major functions | FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc. | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | 240 mA or less | |
Environmental resistance | Ambient temperature | -10 to +60 °C (No freezing) |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Weight | Approx. 55 g (including 3-m cable) | |
*1 The above data was obtained using an iron target (S45C, SS400, t=1 mm). When measuring aluminium, copper, or stainless steel targets, refer to the linear characteristics for these materials. *2 When the digital filter function is used, the sampling rate is 20000 sampling/sec. *3 When the distance between the sensor head and the target is within 50% of the measuring range. |