We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence GT2-S1 , as well as order other industrial equipment and replacement parts for its adjust, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Uruguay, Switzerland, Georgia, Malawi, Latvia, Macedonia, Malaysia, Ethiopia, Austria, Mozambique, China, Fiji, Guinea-Bissau, Montenegro, South Sudan, Bulgaria, South Africa, Liechtenstein, Argentina, Senegal, Venezuela, Kenya, Guatemala, Eswatini, The Gambia, Tunisia, Myanmar, Ukraine, Bolivia, Slovakia, Haiti, Peru, Suriname, Belize, Guinea, Nicaragua, The Bahamas, Afghanistan, Kuwait, Benin, Costa Rica, Finland, Vietnam, Sierra Leone, Belgium, Norway, New Zealand, Burundi.
We have been delivering Keyence products all over the UK and anywhere in the world for over 9 years. All equipment and components are provided with appropriate quality certificates, together with a guarantee from the official producer of products Keyence.
Thanks to the direct deliveries from leading European manufacturers and a minimum trade margin, we offer our customers the most affordable prices for all products presented in our catalogue. If necessary, our qualified specialists will help you select industrial equipment that will fully meet the requirements of the production process. More than 4,000 customers have already appreciated the high quality of the products we supply and the professionalism of the FAMAGA employees.
To clarify the cost of Keyence GT2-S1 and delivery terms, you can fill in a special filling form on our website, give a list of necessary equipment by E-mail or call to the mentioned phone numbers. We will be able to make the best commercial offer for you and provide optimal delivery times to any place in the UK and any country in the world.
Model | GT2-S1*1 | |
Detection system | Differential transformer | |
Measuring range | 1 mm*2 | |
Operating range | 2 mm*2 | |
Resolution | 0.1 µm | |
Indicated accuracy | 1 µm (P-P)*3*4 | |
Measuring force | Downward mounting | 1.12 N*5 |
Side mounting | 1.1 N*5 | |
Upward mounting | 1.08 N*5 | |
Sampling cycle | 1 ms | |
Mechanical response | 40 Hz*4 | |
Operation indicator light | 2-colour LED (red, green) | |
Environmental resistance | Enclosure rating | IP67G (JIS)*6, IP67 (IEC) |
Ambient temperature | -10 to +55 °C (No freezing) | |
Relative humidity | 10 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 1,000 m/s2 (IEC60068-2-27) | |
Materials | Main body | Main body case: SUS440C, Sensor head-relay connector cable: PUR, Relay amplifier: PPSU |
Dust boot | NBR | |
Contact | SUS304, cemented tungsten carbide*7 | |
Sensor head cable | Optional (connect to relay connector) | |
Weight | Approx. 30 g (not including cable)*8 | |
*1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased. For details, contact your local sales office. *2 The measuring range represents the range at which measured values can be displayed. The operating range is the actual movable range of the spindle. *3 Within ±0.15 mm from the centre of the measuring range, the width for any 0.1 mm is 1 µm. The entire area is 2 µm. The linearity for the entire measuring range is ±0.15 % of F.S. (F.S.: 1 mm) *4 Value when the ambient temperature is 20 °C. *5 Representative value at the centre of the measuring range. Please note that the measuring force varies depending on the installation orientation of the dust boot. *6 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable. *7 Contacts are available as options sold separately. *8 Including the relay connector. |