We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence GT-71AP , as well as request other industrial equipment and replacement parts for its refit, please call FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Italy, Ghana, Brunei, Grenada, Andorra, Comoros, Papua New Guinea, Denmark, Haiti, Serbia, Ukraine, India, Côte d\'Ivoire, Tanzania, Lithuania, Hungary, Azerbaijan, Cyprus, Algeria, Tonga, Switzerland, Saudi Arabia, Albania, Angola, Estonia, Armenia, Madagascar, Burundi, The Gambia, Kiribati, Sri Lanka, Barbados, Bhutan, Bolivia, Libya, Jamaica, Yemen, Malaysia, Myanmar, Honduras, Senegal.
We have been distributing Keyence units all around the UK and anywhere in the planet for over 11 years. All equipment and constituents are provided with appropriate quality certificates, along with a guarantee from the official producer of products Keyence.
Thanks to the prompt supplies from leading European manufacturers and a low trade margin, we recommend our customers the most affordable prices for all products presented in our catalogue. If necessary, our professional managers will help you elect industrial equipment that will fully meet the requirements of the operation procedure. More than 4,000 clients have already praised the high quality of the products we deliver and the professionalism of the FAMAGA employees.
To clarify the charge of Keyence GT-71AP and shipment time, you can fill in a special order form on our website, send a list of required instruments by E-mail or call to the specified phone numbers. We will be able to create the best commercial offer for you and provide optimal supply times to any urban place in the UK and any country in the world.
Model | GT-71AP | |
Type | Amplifier unit | |
Output | PNP output | |
Mounting type | DIN rail mount*1 | |
Main unit/Expansion unit | Main unit*2 | |
Power consumption | Normal | At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less |
Power saving (Eco) | At 12 V: 600 mW (50 mA) or less, At 24 V: 840 mW (35 mA) or less | |
Display power | Measured value display | 6-digit 7-segment LED (red) |
Other displays | 2-colour 13-level bar LED display (red, green), indicators (red, green) | |
Display range | -99.999 to 999.999 | |
Display resolution | 1 µm | |
Sampling rate | 2,000 times/second | |
Control input | Timing/preset/bank input | Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more Preset/Bank input: Non-voltage input (relay contact, solid state), input time: 20 ms or more |
Response time | hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s | |
HIGH, GO, LOW output | PNP Offenkollektor, max. 50 mA (40 V oder weniger), Restspannung: 1 V oder weniger, N.O./N.C. umschaltbar | |
Major functions | Preset, Hold, Variable hysteresis, Variable response time, Multiplier setting, Bank function (4 banks), Self-timing, Power save (eco) mode, Application mode, Calibration function, Core alarm | |
Rating | Power voltage | 12 to 24 VDC, Ripple (P-P) 10 % or less*3 |
Environmental resistance | Ambient temperature | -10 to +55 °C (No freezing) |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: Polycarbonate, Cable: PVC | |
Accessories | Instruction manual | |
Weight | Approx. 110 g (including the power cable) | |
*1 Be sure to mount the DIN rail mounting amplifier on a DIN rail (i.e. the unit should be mounted on the metal DIN plate itself). For additional amplifier unit installation, be sure to use the end unit (OP-26751). *2 One main unit and nine expansion units (ten in total) can be additionally installed. For additional amplifier unit installation, each output current must be 20 mA or less. *3 If additional amplifier units are installed, the power supply voltage is 24 VDC. |