We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence PX-10CP , as well as demand other industrial equipment and replacement parts for its refit, please connect FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Pakistan, Jamaica, Norway, Botswana, Nicaragua, Angola, Italy, Algeria, Switzerland, Malta, Slovakia, Iraq, Bhutan, Ecuador, Panama, Turkey, Qatar, Bosnia and Herzegovina, Costa Rica, Uzbekistan, Haiti, Equatorial Guinea, Cameroon, Fiji, Macedonia, Niger, Japan, Paraguay, South Korea, Oman, Sweden, Liechtenstein, Belize, Libya, Sierra Leone, Bangladesh, Congo, Nigeria, Afghanistan, Belgium, Bulgaria.
We have been delivering Keyence elements throughout the UK and anywhere in the world for over 9 years. All equipment and parts are provided with appropriate quality certificates, as well as a guarantee from the official creator of products Keyence.
Thanks to the prompt supplies from key European manufacturers and a minimum trade margin, we propose our customers the most affordable prices for all products presented in our catalogue. If necessary, our qualified specialists will help you select industrial apparatus that will fully meet the necessities of the operation procedure. More than 4,000 consumers have already appreciated the high quality of the elements we supply and the professionalism of the FAMAGA employees.
To clarify the expense of Keyence PX-10CP and shipment time, you can fill in a special inquiry form on our website, send a list of necessary equipment by E-mail or call to the mentioned phone numbers. We will be able to make the best commercial offer for you and provide optimal shipment times to any place in the United Kingdom and any country in the globe.
Model | PX-10CP | |
Type | Connector type | |
Output | PNP | |
Response time | 500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) | |
Output selection | LIGHT-ON/DARK-ON | |
Indicator lamp | - Operation indicator:Red LED x 2, DSC orange LED x 1 - Dual digital monitor:Dual 7-segment display [Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together, current value range:0 to 65504, excess gain:0 P to 999 P] - Hold function:Possible to display both peak and bottom hold values. Selectable from 5 variations. - Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)] - Scaling display | |
Detection mode | Light intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor] | |
Shift function | Variable between –1999 and 9999 | |
Timer function | Timer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shot Timer duration selectable:1 ms to 9999 ms Maximum error against the setting value:10% max. | |
Control output | PNP open-collector 30 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max. | |
External input | ? | |
Interference prevention | Up to 4 units (in all power modes)*1 | |
Rating | Power voltage | 12 to 24 VDC, Ripple (P-P) 10 % or less, Class 2*2 |
Power consumption | Standard mode:50 mA max. at 24 V/55 mA max. at 12 V Power saving mode:40 mA max. at 24 V/45 mA max. at 12 V | |
Environmental resistance | Enclosure rating | IEC: IP67/JEM: IP67/NEMA: 4X |
Ambient temperature | -10 to +55 °C (No freezing)*3 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Case material | Housing:PBT, display:PSU, display cover/connector cover:SUS304, radiator plate:SUS304, gasket:NBR | |
Weight | Approx. 50 g | |
*1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affected somewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts. *2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m or more (PX-H71/H71TZ) or 10 m or more (PX-H72). *3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below. 2 to 4 Units: -10 to +50 °C, 5 to 17 Units: -10 to +45 °C. |