We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
If you want to buy Keyence PX-10 , as well as order other industrial equipment and replacement parts for its adjust, please contact FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Switzerland, Burundi, Namibia, Brazil, Turkmenistan, Nigeria, Bahamas, Czech Republic, Israel, Eritrea, Bolivia, Panama, Thailand, Spain, Grenada, Egypt, Mozambique, Albania, South Africa, Burkina Faso, Monaco, Belarus, Vietnam, Togo, Liechtenstein, South Korea, New Zealand, Sudan, Moldova, Ghana, Niger, Russia, Estonia, Kuwait, Peru, Liberia, El Salvador, Guyana, Armenia, Libya, Luxembourg.
We have been delivering Keyence elements all over the UK and anywhere in the world for over 9 years. All equipment and replacements are provided with appropriate quality certificates, together with a guarantee from the official producer of products Keyence.
Thanks to the direct deliveries from major European manufacturers and a minimum trade margin, we propose our customers the most affordable prices for all products presented in our catalogue. If necessary, our qualified specialists will help you select industrial equipment that will fully meet the requirements of the production process. More than 4,000 customers have already appreciated the high quality of the elements we supply and the professionalism of the FAMAGA employees.
To clarify the expense of Keyence PX-10 and delivery terms, you can fill in a special filling form on our website, give a list of necessary equipment by E-mail or call to the mentioned phone numbers. We will be able to make the best commercial offer for you and provide optimal delivery times to any place in the UK and any country in the world.
Model | PX-10 | |
Type | Cable type | |
Output | NPN | |
Response time | 500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) | |
Output selection | LIGHT-ON/DARK-ON | |
Indicator lamp | - Operation indicator:Red LED x 2, DSC orange LED x 1 - Dual digital monitor:Dual 7-segment display [Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together, current value range:0 to 65504, excess gain:0 P to 999 P] - Hold function:Possible to display both peak and bottom hold values. Selectable from 5 variations. - Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)] - Scaling display | |
Detection mode | Light intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor] | |
Shift function | Variable between –1999 and 9999 | |
Timer function | Timer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shot Timer duration selectable:1 ms to 9999 ms Maximum error against the setting value:10% max. | |
Control output | NPN open-collector 40 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max. | |
External input | Input time 2 ms (ON)/20 ms (OFF) min. | |
Interference prevention | Up to 4 units (in all power modes)*1 | |
Rating | Power voltage | 12 to 24 VDC, Ripple (P-P) 10 % or less, Class 2*2 |
Power consumption | Standard mode:50 mA max. at 24 V/55 mA max. at 12 V Power saving mode:40 mA max. at 24 V/45 mA max. at 12 V | |
Environmental resistance | Enclosure rating | IEC: IP67/JEM: IP67/NEMA: 4X |
Ambient temperature | -10 to +55 °C (No freezing)*3 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Case material | Housing:PBT, display:PSU, display cover/connector cover:SUS304, radiator plate:SUS304, gasket:NBR | |
Weight | Approx. 100 g (Including cable) | |
*1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affected somewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts. *2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m or more (PX-H71/H71TZ) or 10 m or more (PX-H72). *3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below. 2 to 4 Units: -10 to +50 °C, 5 to 17 Units: -10 to +45 °C. |