We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822384003
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you want to gain Aventics (brand of Emerson) 0822384003, as well as order other industrial equipment and replacement parts for its repair, please approach FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Ethiopia, Fiji, Latvia, Nigeria, Estonia, East Timor, Andorra, Turkmenistan, Egypt, Swaziland, Slovakia, Guatemala, Madagascar, Lithuania, Papua New Guinea, South Africa, Indonesia, Jamaica, India, Denmark, Comoros, Finland, Armenia, Tonga, Sudan, Philippines, Libya, Bangladesh, Mozambique, Antigua and Barbuda, Lesotho, Côte d\'Ivoire, Norway, Venezuela, Slovenia, Iran, Barbados, Benin, Bahrain, Ukraine, Suriname, Greece, El Salvador, Spain, Hungary.
We have been delivering Aventics (brand of Emerson) units all around the UK and anywhere in the earth for over 10 years. All machinery and parts are provided with appropriate quality certificates, with a guarantee from the official creator of products Aventics (brand of Emerson).
Thanks to the direct deliveries from prominent European manufacturers and a minimal trade margin, we suggest our customers the most affordable prices for all products exposed in our catalogue. If necessary, our qualified specialists will help you select industrial apparatus that will fully meet the necessities of the mode of operation. More than 4,000 customers have already valued the high quality of the elements we supply and the dedication of the FAMAGA team members.
To clear up the value of Aventics (brand of Emerson) 0822384003 and delivery terms, you can complete a special order form on our website, give a list of required machinery by E-mail or call to the mentioned phone numbers. We will be able to devise the best commercial offer for you and provide adequate distribution times to any city in the UK and any country in the planet.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |