We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821401168
Description
Operating mode | hold: spring force, release: compressed air |
Function type | Hold with clamping jaws |
suitable piston rod diameter | 20 mm |
Piston diameter | 63 mm |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you want to buy Aventics (brand of Emerson) 0821401168, along with request other industrial equipment and constituent parts for its mend, please connect FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Dominica, Nicaragua, Latvia, Uganda, Croatia, Madagascar, Lesotho, Spain, Jamaica, Armenia, Andorra, Cyprus, Oman, Mozambique, Cape Verde, Yemen, Equatorial Guinea, Cambodia, Saudi Arabia, Libya, India, Egypt, South Sudan, Côte d\'Ivoire, El Salvador, Ukraine, Moldova, Suriname, Slovakia, Central African Republic, Vietnam, Senegal, Nigeria, Sudan, Hungary, Namibia, The Gambia, Laos, Grenada, Bahrain, Monaco.
We have been supplying Aventics (brand of Emerson) units throughout Great Britain and anywhere in the planet for over 11 years. All equipment and components are provided with appropriate quality certificates, as well as a guarantee from the official manufacturer of products Aventics (brand of Emerson).
Thanks to the direct deliveries from leading European manufacturers and a low trade margin, we offer our customers the most affordable prices for all products displayed in our catalogue. If necessary, our proficient consultants will help you select industrial equipment that will fully meet the necessities of the operation procedure. More than 4,000 consumers have already appreciated the high quality of the products we bring and the professionalism of the FAMAGA employees.
To clear up the cost of Aventics (brand of Emerson) 0821401168 and shipment time, you can complete a special inquiry form on our website, send a list of necessary equipment by E-mail or call to the quoted phone numbers. We will be able to create the best trade offer for you and provide short distribution times to any city in the UK and any country in the earth.
Function | Hold with clamping jaws |
Release pressure | 4 ... 8 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Weight | See table |
Warning: The holding unit may not be used for the following applications:1) for dynamic holding2) in or as safety equipment Holding unit may only be unlocked when turned off. Make sure that the load direction does not change during a holding interval. A change in the direction of force, as well as external forces such as impacts, strong vibrations, or torsional forces, will briefly release the piston rod and may destroy the HU1 holding unit. When clamped, there must be no residual pressure on the holding unit ( 0 bar ). Note:The minimum control pressure is >= the working pressure of the cylinder! |
Material |
---|
Housing | Aluminum, black anodized |