We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1821015028
Description
Standardization | ISO 5599-1 |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Type | Gasket ISO 1 |
Stock availability:
On request
If you want to buy Aventics (brand of Emerson) 1821015028, along with request other industrial equipment and constituent parts for its refit, please approach FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Cameroon, Israel, Haiti, Zimbabwe, Algeria, Argentina, Indonesia, Zambia, East Timor, Hungary, Bangladesh, Greece, Antigua and Barbuda, Macedonia, Eswatini, Bolivia, Cuba, Bulgaria, Fiji, Mozambique, Dominican Republic, Oman, Laos, Namibia, South Korea, Palestine, Afghanistan, Uzbekistan, Philippines, Tunisia, Azerbaijan, Guyana, Malaysia, Equatorial Guinea, Madagascar, Belgium, Bhutan, Finland, Spain, Angola.
We have been delivering Aventics (brand of Emerson) products throughout Great Britain and anywhere in the planet for over 11 years. All instruments and constituents are provided with appropriate quality certificates, together with a guarantee from the official creator of products Aventics (brand of Emerson).
Thanks to the direct deliveries from global European manufacturers and a low trade margin, we offer our customers the most reasonable prices for all products exhibited in our catalogue. If necessary, our qualified specialists will help you choose industrial equipment that will fully meet the necessities of the operation procedure. More than 4,000 consumers have already praised the high quality of the goods we supply and the proficiency of the FAMAGA employees.
To clear up the charge of Aventics (brand of Emerson) 1821015028 and shipment time, you can complete a special order form on our website, send a list of essential equipment by E-mail or call to the quoted phone numbers. We will be able to create the best trade offer for you and prepare prompt delivery times to any urban place in the UK and any country in the earth.
Standards | ISO 5599-1 |
Working pressure min./max. | -0,9 ... 16 bar |
Ambient temperature min./max. | 0 ... 80 °C |
Medium temperature min./max. | 0 ... 80 °C |
Medium | Compressed air |
Mounting screw | with hexagon socket |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |