We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand in Great Britain. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422103578
Description
Switching principle | 2x3/2 |
Version | Spool valve, positive overlapping |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 250 l/min |
Compressed air connection input | Ø 6 |
Compressed air connection output | Ø 6 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you want to buy Aventics (brand of Emerson) R422103578, additionally request other industrial equipment and replacement parts for its refit, please approach FAMAGA United Kingdom, United States, Netherlands, Germany, France, Ireland, Kuwait, Monaco, Mauritius, Libya, Belgium, Macedonia, Mexico, Honduras, Philippines, Uzbekistan, Cuba, Australia, Kazakhstan, Guinea-Bissau, South Africa, Mozambique, Sweden, Iraq, Norway, Turkey, Iran, Pakistan, Japan, Laos, Liberia, Belize, Angola, Qatar, Palestine, Turkmenistan, Dominican Republic, Algeria, South Korea, Czech Republic, Costa Rica, The Bahamas, Ukraine, Equatorial Guinea, Venezuela, China, Thailand, Rwanda, Comoros.
We have been supplying Aventics (brand of Emerson) goods throughout the UK and anywhere in the world for over 11 years. All instruments and components are provided with appropriate quality certificates, along with a guarantee from the official manufacturer of products Aventics (brand of Emerson).
Thanks to the upfront deliveries from global European manufacturers and a minimal trade margin, we offer our customers the most affordable prices for all products exposed in our catalogue. If necessary, our professional managers will help you elect industrial instruments that will fully meet the necessities of the mode of operation. More than 4,000 customers have already comprehended the high quality of the products we supply and the dedication of the FAMAGA staff.
To illuminate the expense of Aventics (brand of Emerson) R422103578 and delivery times, you can fill out a special inquiry form on our website, send a list of necessary equipment by E-mail or call to the specified phone numbers. We will be able to create the best financial offer for you and prepare prompt distribution times to any urban place in Great Britain and any country in the world.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 3 ... 7 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
Protective circuit | Z-diode |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 15 ms |
Generic emission standard in accordance with | EN 61000-6-4:2002 |
Generic immunity standard in accordance with | IEC 61000-6-2:2005 |
mounting screws | M3 |
Mounting screw tightening torque | 0,5 Nm |
Weight | 0,064 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). A duty cycle of 100 percent is only valid for single valves. |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber Polyurethane |